LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B, C) from the valve.
  4. Remove the installation nut (D), and then remove the valve from the surge tank.

    [Valve 1 (Intake Manifold)] 

    Fig 1: Locating Variable Intake Solenoid Valve Connector, Vacuum Hoses And Nut - Valve 1 (Intake Manifold)
    G06844951Courtesy of HYUNDAI MOTOR CO.

    [Valve 2 (Surge Tank)] 

    Fig 2: Locating Variable Intake Solenoid Valve Connector, Vacuum Hoses And Nut - Valve 2 (Surge Tank)
    G06844952Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals