LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GL, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Immobilizer System >> Immobilizer Control Unit >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

  1. Install the immobilizer control unit after connecting the unit connector.
  2. Install the steering column assembly.
    NOTE: Do not reuse the shear bolt.
    When install the new shear bolt to the immobilizer unit, tighten the shear bolt until its head is cut off.
  3. Install the crash pad lower panel.
scientia non olet · About LEMON Manuals