LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GL, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Windshield Glass >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

CAUTION:
  • Put on gloves to protect your hands.
  • Use seat covers to avoid damaging any surfaces.
  1. Remove the following items.
    1. Front pillar trim

      (Refer to the INTERIOR TRIM .) )

    2. Inside rearview mirror

      (Refer to the MIRROR .)

    3. Rain sensor

      (Refer to the ROOF TRIM .)

    4. Wiper arm

      (Refer to the COWL TOP COVER .)

    5. Cowl top cover

      (Refer to the COWL TOP COVER .)

    6. Windshield glass deicer connector

      (Refer to the WINDSHIELD WIPER/WASHER .)

  2. Using a screwdriver or remover, remove the windshield molding (A).
    Fig 1: Identifying Windshield Molding
    G06873452Courtesy of HYUNDAI MOTOR CO.
  3. Cut out the sealant using the sealant cutting tool [A (09861-31100)].
    Fig 2: Cutting Out Sealant Using Sealant Cutting Tool
    G06873453Courtesy of HYUNDAI MOTOR CO.
  4. Remove the windshield (B) carefully using the glass holder (A).
    Fig 3: Removing/Installing Windshield Using Glass Holder
    G06873454Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals