LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GL, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Release the residual pressure in fuel line. (Refer to RELEASE RESIDUAL PRESSURE IN FUEL LINE .)
  2. Remove the rear seat. (Refer to REAR SEAT .)
  3. Remove the fuel pump service cover (A).
    Fig 1: Identifying Fuel Pump Service Cover
    G06874351Courtesy of HYUNDAI MOTOR CO.
  4. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D).
    Fig 2: Identifying Fuel Pump Connector, Fuel Tank Pressure And Fuel Feed Tube Quick Connector
    G06874352Courtesy of HYUNDAI MOTOR CO.
  6. Remove locking ring (A) by using the special service tool (B) [No.: 09310-2S200].
    Fig 3: Removing Locking Ring Using Special Service Tool
    G00534799Courtesy of HYUNDAI MOTOR CO.

    Fuel Pump locking ring loosening torque:  Min. 68.65 M.m (Min. 7 kgf.m, Min. 50.6 lb-ft)

  7. Remove the fuel pump from the fuel tank.
    Fig 4: Identifying Locking Ring, O-Ring, Fuel Pump Assembly And Fuel Level Sensor
    G06874354Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals