LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GLS, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Shift Lever >> Repair Procedures >> Adjustment >> Adjusting method for T/M control cable
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Adjusting method for T/M control cable

  1. Set room side lever and T/M side lever to "N" position.
  2. Connect room side lever and shift cable.
  3. Push cable to "F" direction, shown, to eliminate FREE PLAY.
  4. Tighten adjusting nut (A).

    Tightening torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

    Fig 1: Pushing Cable To F Direction
    G06873193Courtesy of HYUNDAI MOTOR CO.
  5. After adjusting according Check to be sure that this part operates surely at each range of T/M side corresponding to each position of room lever.
scientia non olet · About LEMON Manuals