LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Immobilizer System) >> Immobilizer Control Unit >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD ")

  3. Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening the bolt.

    [USA] 

    Fig 1: Identifying Immobilizer Unit (USA)
    G09135363Courtesy of HYUNDAI MOTOR AMERICA

    [CANADA] 

    Fig 2: Identifying Immobilizer Unit (Canada)
    G09135364Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals