LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Veracruz Limited, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System (MGH-60) >> ESC Control Module >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF.
  2. Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a spanner.
    Fig 1: Identifying Brake Tubes
    G06857834Courtesy of HYUNDAI MOTOR CO.
  3. Pull up the lock of the ESC control unit connector, then disconnect the connector (A).
  4. Loosen the ESC HECU bracket bolts and nut, then remove HECU and bracket.
    CAUTION:
    1. Never attempt to disassemble the HECU.
    2. The HECU must be transported and stored in a sealed clean plastic bag in a upright position with all brake line ports capped.
    3. Never shock to the HECU.
  5. Remove the 3 bolts, then remove the bracket from HECU.
scientia non olet · About LEMON Manuals