LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Accent SE, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Antilock Brake System/Electronic Stability Control Diagnosis >> DTC C1702: Variant Coding Error >> Scantool Diagnostics >> Variant coding
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Variant coding

  1. Connect GDS to Data Link Connector (DLC).
  2. IG "ON"
  3. Using GDS, Perform Variant coding program. (Fig 1)
  4. IG "OFF" and wait for about 10 seconds, and then IG "ON"
  5. IG "OFF" and wait for about 10 seconds again, and then, IG "ON"
  6. Go to "COMPONENT INSPECTION " procedure.
    Fig 1: Display - Variant Coding GDS Diagnostic Item
    G08805063Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals