LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Filler-Neck Assembly >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Remove the rear-LH wheel, tire, and the inner wheel house.
  2. Disconnect the fuel filler hose (A) and the ventilation hose quick-connector (B).
    Fig 1: Fuel Filler Hose And Ventilation Hose Quick-Connector
    G10234602Courtesy of HYUNDAI MOTOR AMERICA
  3. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
    Fig 2: Fuel Filler-Neck Assembly Mounting Screw
    G10234603Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolts (A).
    Fig 3: Filler-Neck Assembly Bracket Mounting Bolts
    G10234604Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals