Rear Wheel Alignment ~ 2013-03-25: Notes
CAUTION:
When using a commercially available computerized wheel alignment equipment to inspect the rear wheel alignment, always position the vehicle on a level surface.
Prior to inspection, make sure that the rear suspension system is in normal operating condition and that the tires are inflated to the specified pressure.
Prior to inspection, make sure that the rear suspension system is in normal operating condition and that the tires are inflated to the specified pressure.
Toe
B - A > 0: Toe in (+)
B - A < 0: Toe out (-)
Toe is pre-set at the factory, so it does not need to be adjusted. If the toe is not within the standard value, replace or repair the damaged parts and then inspect again.
Toe:
Total: 0.5°(+0.4°/-0.3°)
Individual: 0.25°(+0.2°/-0.15°)
NOTE:
l L - R l means deviation of the left and right individual toe values.
L: Left toe value
R: Right toe value