Repair Procedures: Removal
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Disconnect the variable intake solenoid valve connector (A).
- Disconnect the vacuum hoses (B, C) from the valve.
- Remove the installation nut (D), and then remove the valve.
[Valve 1 (Intake manifold)]
Fig 1: Identifying Variable Intake Solenoid Valve Connector, Vacuum Hoses And Mounting Nut (Valve 1 Intake manifold)Courtesy of HYUNDAI MOTOR AMERICA
[Valve 2 (Surge tank)]