Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
Refer to DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING .
Remove the steering wheel.
Refer to STEERING COLUMN AND SHAFT .
Remove the steering wheel cover (A) after loosening the screws.

Fig 1: Identifying Steering Wheel Cover And Screws
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Identifying Steering Wheel Cover With Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the screws after disconnecting the steering wheel remote control switch connector (A).

Fig 3: Identifying Steering Wheel Remote Control Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the remote control switches (A).

Fig 4: Identifying Remote Control Switch
Courtesy of HYUNDAI MOTOR AMERICA