LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Body Dimensions >> General Information >> Measurement Method >> Measurement Point
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Measurement Point

  1. Measurements should be taken at the hole center.
    Fig 1: Hole Center Measurement Points
    G09133946Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals