April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Installation

Install in the reverse order of removal.
NOTE:
- Use a SST (09480-A3800) or 0.1969in. (5mm) bolt fix the inhibitor manual control lever in the N jig hole (A) when you assemble the inhibitor (B).
  
  Fig 1: N Jig Hole And Inhibitor
  Courtesy of HYUNDAI MOTOR AMERICA
- Adjust the shift cable after you install the inhibitor switch.
  (Refer to "SHIFT CABLE ")