Repair procedures: Removal

Remove the battery and the battery tray.
(Refer to "CHARGING SYSTEM ")
Remove the under cover (A).
Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft))

Fig 1: Under Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the air cleaner assembly and air duct.
(Refer to "AIR CLEANER ")
Remove the battery and battery tray.
(Refer to "BATTERY ")
Remove the under cover.
(Refer to "ENGINE ROOM UNDER COVER ")
Remove the valve body.
(Refer to "VALVE BODY ")
Disconnect the solenoid valve connector (A).

Fig 2: Disconnecting Solenoid Valve Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the solenoid valve main connector mounting clip (A) after removing the bolt.

Fig 3: Solenoid Valve Main Connector Mounting Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the solenoid valve main connector (A).

Fig 4: Solenoid Valve Main Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the input & output speed sensor connector (A) after press the lock from the solenoid valve main wiring.

Fig 5: Input And Output Speed Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the solenoid valve main wiring & oil temperature sensor after loosening the main connector bolt (A).

Fig 6: Oil Temperature Sensor Main Connector Bolts
Courtesy of HYUNDAI MOTOR AMERICA