LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Manual Transaxle Control System) >> Back-up Lamp Switch >> Repair Procedures >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2013 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the back up lamp switch connector (A).
    Fig 1: Back Up Lamp Switch Connector
    G10234976Courtesy of HYUNDAI MOTOR AMERICA
  2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
  3. If necessary, repair or replace the backup lamp switch.
    Fig 2: Checking Continuity Between Backup Lamp Switch Terminals
    G10234977Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals