July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the battery. (Refer to REMOVAL )
Disconnet the vehicle speed sensor (A).

Fig 1: Vehicle Speed Sensor Connector

G00558262

Courtesy of HYUNDAI MOTOR AMERICA

Remove the vehicle speed sensor (A).

Fig 2: Identifying Vehicle Speed Sensor (A)
Courtesy of HYUNDAI MOTOR AMERICA

Tightening Torque:

5.9 ~ 7.8 N.m (0.6 ~ 0.8 kgf.m, 4.3 ~ 5.8 lb-ft)
CAUTION:
- After removing speed sensor, be careful not to enter dust, foreign matters, etc in speed sensor hole
- Check the wear of spline (A).
- When installing, do not reuse the O-ring (B).
  
  Fig 3: Identifying Speed Sensor & O-Ring
  Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.