LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2014 >> Equus Signature >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Power Trunk Module >> Power Trunk Module Drive Unit >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

CAUTION:
  • When removing and installing the trunk lid, an assistant is necessary.
  • Take care not to be closed the trunk when removing the push rod.
  • Wear gloves to protect hands from injury.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the left trunk trim in the trunk. (Refer to the TRUNK TRIM .
  3. Remove the power trunk connecting rod (B) after removing the push rod pin (A).
    NOTE:
    • Only remove the gas lifter when removing the whole trunk assembly.
    Fig 1: Identifying Power Trunk Connecting Rod And Push Rod Pin
    G09791258Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the power trunk module & drive unit (A) after removing the bolts, nut and connector.
    Fig 2: Identifying Power Trunk Module And Drive Unit
    G09791259Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals