Service Specifications
WARNING: This page is about a different car, the 2014 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Standard value | Limit | |
|---|---|---|---|
| Timing chain | |||
| Valve clearance mm (in) | Intake | 0.22 ± 0.04 (0.009 ± 0.001) | - |
| Exhaust | 0.30 ± 0.04 (0.012 ± 0.001) | - | |
| Camshaft | |||
| Cam height mm (in) | Intake | 44.81 (1.764) | 44.31 (1.744) |
| Exhaust | 43.98 (1.731) | 43.48 (1.712) | |
| Cylinder head and valves | |||
| Cylinder head bottom face distortion mm (in) | 0.03 (0.001) or less | - | |
| Cylinder head overall height mm (in) | 112.9 - 113.1 (4.445 - 4.452) | - | |
| Valve margin mm (in) | Intake | 0.85 (0.033) | - |
| Exhaust | 1.50 (0.059) | - | |
| Valve length mm (in) | Intake | 87.21 (3.433) | 86.71 (3.414) |
| Exhaust | 88.54 (3.486) | 88.04 (3.466) | |
| Valve spring free length mm (in) | 49.6 (1.95) | 48.6 (1.91) | |
| Valve spring out-of-squareness | 2° or less | 4° | |
| Valve stem-to-guide clearance mm (in) | Intake | 0.020 - 0.047 (0.0008 - 0.0018) | 0.10 (0.004) |
| Exhaust | 0.030 - 0.057 (0.0012 - 0.0022) | 0.15 (0.006) | |
| Valve seat contact width mm (in) | 1.1 - 1.5 (0.044 - 0.059) | - | |
| Valve guide press-fit height mm (in) | 12.7 - 13.3 (0.50 - 0.52) | - | |
| Piston and connecting rod | |||
| Piston pin press-fit load N (lb) | 2, 000 - 8, 000 (449.7 - 1798.5) | - | |
| Connecting rod big end thrust clearance mm (in) | 0.10 - 0.35 (0.004 - 0.013) | 0.4 (0.02) | |
| Outside diameter difference of connecting rod bolt mm (in) | 0 - 0.1 (0 - 0.003) | - | |
| Piston ring to ring groove clearance mm (in) | No. 1 | 0.03 - 0.07 (0.0012 - 0.0027) | 0.1 (0.004) |
| No. 2 | 0.02 - 0.06 (0.0008 - 0.0023) | 0.1 (0.004) | |
| Piston ring end gap mm (in) | No. 1 | 0.15 - 0.30 (0.006 - 0.011) | 0.8 (0.03) |
| No. 2 | 0.20 - 0.40 (0.008 - 0.015) | 0.8 (0.03) | |
| Oil ring | 0.10 - 0.35 (0.004 - 0.013) | 1.0 (0.04) | |
| Crankshaft pin oil clearance mm (in) | 0.026 - 0.062 (0.0011 - 0.0024) | 0.1 (0.004) | |
| Crankshaft and cylinder block | |||
| Crankshaft bearing cap bolt shank length mm (in) | 74.15 - 74.85 (2.920 - 2.946) | - | |
| Crankshaft end play mm (in) | 0.09 - 0.27 (0.004 - 0.010) | 0.30 (0.012) | |
| Crankshaft journal oil clearance mm (in) | 0.023 - 0.043 (0.0010 - 0.0016) | 0.1 (0.004) | |
| Cylinder block top surface distortion mm (in) | 0.05 (0.002) | 0.1 (0.004) | |
| Cylinder bore mm (in) | 75.0 (2.95) | - | |
| Cylindrically mm (in) | 0.01 (0.0004) or less | - | |