Repair Procedures - Turbo: Installation
- Install in the reverse order of removal.
- Adjust the alternator belt tension after installation.
(Refer to "DRIVE BELT ")
Alternator installation bolt:
[12mm (0.47in) bolt]
19.6 ~ 26.5 Nm (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)
[14mm (0.55in) bolt]
29.4 ~ 41.2 Nm (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 lb-ft)