Repair procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the steering column upper and lower shrouds.
(Refer to STEERING COLUMN AND SHAFT )
Disconnect the ignition switch connector (B) and the key switch connector (A) from under the steering column.

Fig 1: Disconnecting Ignition Switch Connector And Key Switch Connector From Under Steering Column
Courtesy of HYUNDAI MOTOR AMERICA
If it is necessary to remove the key lock cylinder (A), remove the key lock cylinder after pushing lock pin with key ACC.

Fig 2: Removing Key Lock Cylinder

Courtesy of HYUNDAI MOTOR AMERICA