LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Elantra Coupe GLS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Manifold Absolute Pressure Sensor Connector And Installation Bolt
    G10548890Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals