LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L GDI >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Engine Coolant Temperature Sensor Connector (A).
    Fig 1: Engine Coolant Temperature Sensor Connector
    G10607924Courtesy of HYUNDAI MOTOR AMERICA
  3. Supplement the Engine Coolant (Refer to: "Cooling System" in EM procedure).
scientia non olet · About LEMON Manuals