LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules & Clock Spring >> Driver Airbag (DAB) Module and Clock Spring >> Repair procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair procedures: Removal

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the driver airbag module mounting bolts (A).
    Fig 1: Driver Airbag Module Mounting Bolts
    G10368080Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the wiring fixing clip (C) and disconnect the horn connector (A).
    Fig 2: Wiring Fixing Clip And Horn Connector
    G10368081Courtesy of HYUNDAI MOTOR AMERICA
  4. Release the connector locking pin, then disconnect the driver airbag module connector (B).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover facing up.
  5. Remove the steering wheel and steering wheel column shroud.

    (Refer to "STEERING COLUMN AND SHAFT ")

    Fig 3: Steering Wheel Column Shroud Bolts
    G10368082Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
Fig 4: Clock Spring And Horn Connector
G10368083Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals