Repair Procedures: Installation
WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
- Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
- Install the dynamic damper.
- Install the dynamic damper band (A).
- Using the SST (09495-3K000), secure the TJ boot bands (B).
Clearance (A): 2.0 mm (0.079 in) or less
- Install the TJ joint assembly.
(Refer to "TJ JOINT ")
- Install the front driveshaft.
(Refer to "FRONT DRIVESHAFT ")