Repair Procedures: Installation
WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
- Install in the reverse order of removal.
- Insert the piston in the cylinder the SST (09581-11000).
- After installation, bleed the brake system.
(Refer to: BRAKE SYSTEM BLEEDING ).
CAUTION:- DO NOT hit piston end by hammer or prying directly against piston face with screwdriver to push in piston.
- Using wood or used pad to protect piston end and pushing the wood or pad is recommended.
- When spreading a piston, SST should be cover all area of piston end face.