LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Genesis Coupe 3.8 R-Spec >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle Control System) >> Transaxle Control Module (TCM) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM connector (A).
  3. Disconnect the TCM connector (B).
  4. Remove the ECM & TCM bracket installation bolts (C) and nut (D).
    Fig 1: Removing ECM & TCM Bracket Installation Bolts And Nut
    G10480522Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the ECM from bracket after remove the installation bolts (A).
Fig 2: Removing ECM From Bracket
G10480523Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals