LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.4L (Except HEV) >> Shift Cable >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Air cleaner assembly and air duct.

    (Refer to: Engine Mechanical System - "AIR CLEANER ").

  2. Battery and battery tray.

    (Refer to: Engine Electrical System - "BATTERY ").

  3. Remove the nut (A) from the manual control lever.
  4. Disconnect the shift cable (B) from the bracket (C) at transaxle side.
    Fig 1: Identifying Shift Cable, Bracket And Nut
    G10571258Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the floor console assembly.

    (Refer to: Body - "FLOOR CONSOLE ").

  6. Remove the air duct (A).
    Fig 2: Identifying Air Duct
    G10571259Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the shift cable (A).
    1. Disconnect the cable bracket from the shift lever after pushing the lock.
    2. Disconnect the cable holder (A) from the shift lever.
      Fig 3: Disconnecting Shift Cable
      G10571260Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the airbag module.

    (Refer to Restraint - "AIRBAG MODULE ")

  9. Disconnect the shift cable retainer (B) after removing the mounting nut (A).
  10. Remove the shift cable by pulling it toward the interior.
    Fig 4: Identifying Shift Cable Retainer And Mounting Nut
    G10571261Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals