Repair Procedures: Removal

Remove the valve body assembly.
(Refer to: Valve body System - "VALVE BODY ").
Disconnect the input & output speed sensor connector (A).
Loosen the main connector bolt (B).
Tightening Torque:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 1: Input And Output Speed Sensor Connector And Main Connector Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the solenoid valve connector (A).
1. Press the lock
2. Pull up lever
Fig 2: Disconnecting Solenoid Valve Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the solenoid valve connector mounting clip (A).

Fig 3: Identifying Solenoid Valve Connector Mounting Clip
Courtesy of HYUNDAI MOTOR AMERICA
Remove the solenoid valve connector (A) by pushing down from the transaxle.

Fig 4: Removing Solenoid Valve Connector
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION:

Fig 5: Identifying O-Ring

Courtesy of HYUNDAI MOTOR AMERICA