Floor Console Replacement

[M/T]

CAUTION:

A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape and apply protective tape around the related parts to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the Parking Brake Cover (A).

Fig 1: Parking Brake Cover
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the Gear Boots (A).

Fig 2: Gear Boots
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the Console Upper Cover (A).

Fig 3: Console Upper Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Console Tray Mat (A).

Fig 4: Console Tray Mat
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the Mounting Screws and Bolts, then remove the Floor Console Assembly (A).

Fig 5: Floor Console Assembly Mounting Screws And Bolts
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the Mounting Clips and Screws, remove the Console Side Cover (A).

Fig 6: Loosening Console Side Cover Mounting Screws And Clips
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connector are connected in properly.
- Replace any damaged clips.

[A/T]

CAUTION:

A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the Parking Brake Cover (A).

Fig 7: Parking Brake Cover
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the Console Upper Cover (A).

Fig 8: Console Upper Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the Connector (A).

Fig 9: Connector Location
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Console Tray Mat (A).

Fig 10: Console Tray Mat
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the Mounting Screws and Bolts, remove the Floor Console Assembly (A).

Fig 11: Floor Console Assembly Mounting Screws And Bolts
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the Mounting Clips and Screws, remove the Console Side Cover (A).

Fig 12: Console Side Cover Mounting Clip And Screws
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE:
- Make sure the connectors are connected in properly.
- Replace any damaged clips.