LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the Battery Negative Terminal.
  2. Remove the Driver Airbag Module.

    (Refer to: Restraint - "AIRBAG MODULE ").

  3. Remove the Steering Wheel.

    (Refer to: Steering System - "STEERING COLUMN AND SHAFT ").

  4. Remove the Steering Wheel Cover (A) after loosening the screws.
    Fig 1: Steering Wheel Cover With Screws
    G10604443Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the Audio Switch Connector (A).
    Fig 2: Audio Switch Connector
    G10604444Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the Cruise Control Switch Connector (A) and the Trip Switch Connector (B).
    Fig 3: Cruise Control Switch Connector And Trip Switch Connector
    G10604445Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the Wiring (A) and then loosen the Screws.
    Fig 4: Wiring With Screws
    G10604446Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the Steering Wheel Remote Control Switch Assembly (A).
    Fig 5: Steering Wheel Remote Control Switch Assembly
    G10604447Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the Cruise Control Switch (A).
    Fig 6: Cruise Control Switch
    G10604448Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: Be careful not to damage the Hook when removing the Switch.