Repair Procedures: Disassembly

Remove the Snap Ring (A).

Fig 1: Removing Snap Ring
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Hub Assembly from the Knuckle Assembly.
1. Install the Front Knuckle Assembly (A) on a Press.
2. Lay a suitable adapter (B) upon the Hub Assembly Shaft.
3. Remove the Hub Assembly (C) from the Knuckle Assembly (A) by using a Press.
Fig 2: Removing Hub Assembly From Knuckle Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the Hub Bearing Inner Race from the Hub Assembly.
1. Install a Suitable Tool (A) for removing the Hub Bearing Inner Race on the hub Assembly.
2. Lay the Hub Assembly and tool (A) upon a Suitable Adapter (B).
3. Lay a Suitable Adapter (C) upon the Hub Assembly Shaft.
4. Remove the Hub Bearing Inner Race (D) from the hub assembly by using a Press.
  
  Fig 3: Removing Hub Bearing Inner Race From Hub Assembly
  Courtesy of HYUNDAI MOTOR AMERICA
Remove the Hub Bearing Outer Race from the Knuckle Assembly.
1. Lay the Hub Assembly (A) upon a suitable adapter (B).
2. Lay a Suitable Adapter (C) upon the Hub Bearing Outer Race.
3. Remove the Hub Bearing Outer Race from the Knuckle Assembly by using a Press.
  
  Fig 4: Removing Hub Bearing Outer Race From Knuckle Assembly
  Courtesy of HYUNDAI MOTOR AMERICA
Replace Hub Bearing with a new one.