LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System - 1.6L T-GDI) >> Boost Pressure Sensor (BPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Boost Pressure Sensor Connector (A).
  3. Remove the Installation Bolt (B), and then remove the Sensor.
Fig 1: Boost Pressure Sensor Connector And Installation Bolt Location
G10604546Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals