Toe Adjustment
- Loosen the Tie Rod End Lock Nut.
- Remove The Bellows Clip To Prevent The Bellows From Being Twisted.
- Adjust the Toe by screwing or unscrewing the Tie Rod. Toe Adjustment should be made by turning the right and left Tie Rods by the same amount.
Toe:
Total: 0.1° ± 0.2°
Individual: 0.05° ± 0.1°
- When completing the Toe Adjustment, install the Bellows Clip and tighten the Tie Rod End Lock Nut to specified torque.
Tightening Torque:
23.5 ~ 33.3N.m (2.4 ~ 3.4kgf.m, 17.4 ~ 24.6lb-ft)