Repair Procedures: Removal

Remove Valve Core and deflate the Tire.
Remove the side of the Tire Bead area from the Wheel using Tire Changing Machine.

Fig 1: Removing Side Of Tire Bead
Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
- The Tire Bead should be broken approx. 90° from the Valve side of the Wheel. The Bead Breaker should not be set too deep.
- Avoid Tire/Tool contact with the Valve on dismount.
- Dismount should end near the Valve.
Rotate the Wheel clockwise.

Fig 2: Rotating Wheel Clockwise (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Rotating Wheel Clockwise (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA