LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Motor >> Repair Procedures >> Inspection >> Front Power Window Motor Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Power Window Motor Inspection

  1. Remove the front door trim panel.

    (Refer to "FRONT DOOR ")

  2. Disconnect the connector from the motor.
    Fig 1: Disconnecting Connector From Motor & Connector End View
    G12019256Courtesy of HYUNDAI MOTOR AMERICA
  3. Connect the motor terminals No. 4 directly to battery voltage (12V) and connect the motor terminals No. 3 and No. 6 directly to battery (-). And then check that the motor operates smoothly. If the operation is abnormal, replace the motor.

    Safety Power Window 

    Fig 2: Front Power Window Motor Connector Terminals Continuity Chart (Safety Power Window)
    G12019257Courtesy of HYUNDAI MOTOR AMERICA
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

    General 

    Fig 3: Front Power Window Motor Connector Terminals Continuity Chart (General)
    G12019258Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals