Power Window Main Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the front door trim panel.
(Refer to "FRONT DOOR ")
Disconnect the connector from the switch.

Fig 1: Power Window Switch Connector End View
Courtesy of HYUNDAI MOTOR AMERICA
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Power Window Main Switch Connector Terminals Continuity Chart
Courtesy of HYUNDAI MOTOR AMERICA

Auto Down

Fig 3: Power Window Main Switch Connector Terminals Continuity Chart (Auto Down)
Courtesy of HYUNDAI MOTOR AMERICA