Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
NOTE:
1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
2. Smear and cover splines (B) with molybdenum type high pressure grease.
  TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT
  
  Fig 1: Locating O-Ring
  Courtesy of HYUNDAI MOTOR AMERICA
3. Install the propeller shaft to be near runout marking (Transfer assembly 1 ea, propeller shaft 1 ea) each other.
  
  Fig 2: Installing Propeller Shaft To Runout Marking
  Courtesy of HYUNDAI MOTOR AMERICA