LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Azera Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Knee Airbag (KAB) Module >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes.
  3. Connect the knee airbag connector.
  4. Tighten the knee airbag mounting nuts.

    Tightening torque: 

    7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

  5. Install the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  6. Install the crash pad side cover.

    (Refer to Body - "CRASH PAD SIDE COVER ")

  7. Reconnect the battery negative cable.
  8. After installing the knee airbag, confirm proper system operation:
    • Turn the ignition switch ON; the SRS indicator light should be turned on for about six seconds and then go off.
scientia non olet · About LEMON Manuals