LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Canister Close Valve (CCV) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B).
  5. Remove the fuel tank air filter after removing the mounting bolts (C).
    Fig 1: Disconnecting Canister Close Valve Connector
    G12066390Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the illustrations below .
Fig 2: Releasing Lever
G12066391Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Rotating Canister Close Valve From Fuel Tank Air Filter
G12066392Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals