LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Santa Fe Limited Ultimate, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation bolt (B) and nuts (C), and the remove the accelerator pedal medule.
G12034044Courtesy of HYUNDAI MOTOR AMERICA
G12034045Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals