Major Features: Notes

Display Vehicles Surrounding in Video
The surrounding area video display function displays the 360 degrees video image captured through 4 cameras to the driver through the Head Unit Screen while the vehicle is moving at low speed or going reverse. The Multi-View Camera System displays total of 8 video modes for displaying surrounding video based on the vehicle driving state and the driver's selection.
Guide Line Indication & Steering Wheel Synchronized Feature
The Guide Line Indication & Steering Wheel Synchronized Feature is the function that assists the driver in parking by synchronizing the steering wheel with the rear view video display marked with a guide line to help anticipate the direction of the vehicle going reverse.
Front/Rear Object Warning (Obstacle Detection Feature)
The system receives obstacle warning signal from the PAS or SPAS sensors mounted on the front/rear of the vehicle and displays the obstacle location on the AVN Head Unit Screen.
Tolerance Compensation (including A/S)
Manual Tolerance Compensation Software is embedded in the Multi-View Camera ECM to compensate the Multi-View Camera deviation that may occur due to assembly line installation tolerance. You must first setup proper work environment in order to perform correct tolerance compensation.

MAIN FEATURES CHART

No	Main Features	Detailed Description	Notes
1	8 View Mode Display	4 Front & 4 Rear View Mode Display	Merged Video Display of 8 Modes
2	Front Assist Mode Selection Feature	Display only the Front Mode by using the Front Mode Selection Switch	Same as the PAS Multi-View Camera Switch
3	Rear Steering Synchronized Parking Guide Line Display	Displays Parking Guide Line by synchronizing with the steering wheel when going reverse.	Display over the Rear Video
4	PAS Obstacle Indication	Display obstacle warning from rear and front PAS	Display both on the Cluster and the Head Unit
5	User Setting Option	Select Steering Wheel Synchronized Guide Line Indication Select Front/Rear Obstacle Indication Select Initial Front/Rear View Screen	Provides additional screen settings
6	Assembly Line & A/S Tolerance Compensation Feature	Compensation - Tolerance Compensation for camera installation deviation and assembly line tolerance is required	Compensation function recognition logic applied