LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Switch >> Repair Procedures >> Removal >> Rear Power Window Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Power Window Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim.

    (Refer to "REAR DOOR TRIM ")

  3. Remove the power window switch assembly (A) after loosening the mounting screws (3EA).
    G12036199Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 1: Rear Power Window Switch Connector Terminals Continuity Chart
    G12036200Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals