LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Inspection

  1. Turn ignition switch OFF.
  2. Remove the air duct.

    (Refer to "AIR CLEANER ")

  3. Disconnect the solenoid valve connector (A).
    G12034309Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals