LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Control Module (BCM) >> Repair Procedures >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center panel.

    (Refer to CRASH PAD CENTER PANEL Body )

  3. Disconnect the body control module connectors (A).
    Fig 1: Locating Body Control Module Connectors
    G12054490Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the body control module (A) after loosening the nuts.
Fig 2: Locating Body Control Module With Nuts
G12054491Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals