Measuring Resistance
- Disconnect the cruise control switch connector from the control switch.
- Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).TERMINAL RESISTANCE SPECIFICATIONS
Function Switch Terminal Resistance (kΩ) SET - 2 - 7 0.31 ~ 0.35 RES + 2 - 7 0.52 ~ 0.58 SCC 2 - 7 2.42 ~ 2.67 CANCEL 2 - 7 0.17 ~ 0.19 CRUISE 2 - 7 0.84 ~ 0.92 - If not within specification, replace switch.