Repair Procedures: Removal: Notes

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the driver airbag module.
(Refer to: Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ").
Remove the steering wheel.
(Refer to: Steering System - "STEERING COLUMN AND SHAFT ").
Remove the steering wheel cover (A) after loosening the screws.

Fig 1: Loosening Steering Wheel Cover Screws (Front)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Loosening Steering Wheel Cover Screws (Rear)
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the screws after disconnecting the steering wheel remote control switch connector (A).