Rear Power Window Switch

Disconnect the negative (-) battery terminal.
Remove the rear door trim. (Refer to Body - "Rear Door Trim ")
Remove the power window switch assembly after disengaging the retaining clips.

Fig 1: Locating Power Window Switch Assembly Retaining Clips
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Removing Power Window Switch Assembly Retaining Clips
Courtesy of HYUNDAI MOTOR AMERICA

Information
- Replace any damaged clips.
  
  Fig 3: Locating Power Window Switch Assembly Damaged Clips (1 Of 2)
  Courtesy of HYUNDAI MOTOR AMERICA
  
  Fig 4: Locating Power Window Switch Assembly Damaged Clips (2 Of 2)
  Courtesy of HYUNDAI MOTOR AMERICA