Repair Procedures: Disassembly

Remove the alternator cover (A).

Fig 1: Locating Alternator Cover
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).

Fig 2: Locating Brush Holder Assembly And Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the slip ring guide (A).

Fig 3: Locating Slip Ring Guide
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When installing, replace with new OAD cap.
Remove the nut and pulley (A).

Fig 4: Removing Nut And Pulley
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the 4 through bolts (A).

Fig 5: Locating Through Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the rotor (A) and cover (B).

Fig 6: Locating Rotor And Cover
Courtesy of HYUNDAI MOTOR AMERICA
Reassembly is the reverse of disassembly.