LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Driver Airbag (DAB) Module And Clock Spring >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Turn the steering wheel so that the front wheels can face straight ahead.
  3. Remove the driver airbag module mounting bolts (2EA).
    Fig 1: Removing Driver Airbag Module Mounting Bolts
    G12125516Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the wiring fixing clip (C), and then release the connector locking pin to disconnect the driver airbag module connector (B).
    Fig 2: Disconnecting Driver Airbag Module Connector
    G12125517Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION: The removed airbag module should be stored in a clean dry place with the pad cover facing up.
  5. Remove the steering wheel and steering wheel column shroud. (Refer to MDPS ASSEMBLY )
    Fig 3: Removing Steering Wheel And Steering Wheel Column Shroud
    G12125518Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the clock spring connector, then remove the clock spring.
Fig 4: Disconnecting Clock Spring Connector
G12125519Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals